Skip to content

Steel Fabrication Coatings

← System Selectors » Steel Fabrication Coatings

2K DTM (Direct To Metal) Plus

  • Waterproof/Weather Resistance
  • Hard Wearing & Durable
  • Chemical/Solvent Resistance
2-pack acrylic polyurethane high performance “Direct to Metal” coating suitable for truck and bus refinishing and steel fabrications including electrical transformers. Comes in an extensive range of colours in gloss and easy colour matching with Coloryte® Industrial Tint System. At 25ºC, touch dry in 40-50 minutes, hard dry in 12 hours and recoating after 16…

Air Dry Bright Aluminium

  • Waterproof/Weather Resistance
Fast air-drying enamel coating providing a ‘silver frost’ finish effect on metal surfaces including truck chassis and wheels. At 25ºC, touch dry in 20-30 minutes, hard dry in 16 hours and recoating after 16 hours. Apply directly to bare steel. Available in 1L, 4L and 20L pack sizes. Resistance Properties Fast drying Appealing metallic ‘silver’…

Air Dry Heat Resistant Enamels

  • Waterproof/Weather Resistance
  • Heat Resistant
Air-dry coating providing moderate heat resistance to steel surfaces including mufflers and machinery. Comes in matt black or aluminium metallic lustre finish. At 25ºC, touch dry in 10-15 minutes, hard dry in 2 hours and recoating within 45 minutes to 6 hours, or after 72 hours. Apply directly to bare steel. Available in 4L and…

Baking Enamel

  • Waterproof/Weather Resistance
  • Heat Resistant
  • Hard Wearing & Durable
  • Chemical/Solvent Resistance
Fast curing general purpose baking enamel coating for steel fabrications including appliances, office equipment, signs and light fittings. Comes in an extensive range of colours in gloss, satin and matt with easy colour matching with Coloryte® Industrial Tint System. Bake at 150ºC for 20 minutes or at 120ºC for 30 minutes. Recommended Wagonpaint primer with…

Glossprime

  • Waterproof/Weather Resistance
  • Hard Wearing & Durable
  • Corrosion Resistance
Fast air-drying industrial enamel coating with anticorrosive properties for protection and decoration of metal surfaces including trailers, machinery, waste bins and radiators. Comes in a range of colours in gloss. At 25ºC, touch dry in 10-15 minutes, hard dry in 16 hours and recoating after 2 hours. Recommended Wagonpaint primers (if required) include Zinc Phosphate…

Implement Enamel

  • Waterproof/Weather Resistance
  • Heat Resistant
Durable acrylic-modified alkyd enamel topcoat for steel fabrications including tools, agricultural machinery and metal furniture. Comes in an extensive range of colours in gloss and easy colour matching with Coloryte® Industrial Tint System. At 25ºC, touch dry in 1-2 hours, hard dry in 16 hours and recoating after 16 hours. Recommended Wagonpaint primers include Zinc…

Industrial NC Lacquer

  • Hard Wearing & Durable
Fast drying nitrocellulose finish topcoat for metal in industrial applications. Available in an extensive range of colours, including metallics, in gloss. At 25ºC, touch dry in 20-30 minutes, hard dry in 4 hours and recoating after 1 hour (allow 72 hours before staking painted parts). Available in 4L and 20L pack sizes. Resistance Properties Fast…

Purlenamel

  • Waterproof/Weather Resistance
  • Heat Resistant
  • Hard Wearing & Durable
Fast air-drying industrial enamel coating for protection and decoration of metal surfaces including agricultural implements, trailers, machinery and waste bins. Comes in an extensive range of colours in gloss and easy colour matching with Coloryte® Industrial Tint System. At 25ºC, touch dry in 30 minutes, hard dry in 16 hours and recoating within 45 minutes…

Rapid Enamel

  • Waterproof/Weather Resistance
  • Heat Resistant
Fast drying alkyd copolymer finish topcoat for metal and timber. Ideal for steel fabrications including tools, machinery and metal furniture. Comes in an extensive range of colours in gloss, satin and matt and easy colour matching with Coloryte® Industrial Tint System. At 25ºC, touch dry in 5-10 minutes, hard dry in 16 hours and recoating…

Rhinofleet® AC HS

  • Waterproof/Weather Resistance
  • Hard Wearing & Durable
  • Chemical/Solvent Resistance
2-pack acrylic-modified polyurethane high performance topcoat suitable for truck and bus refinishing and steel fabrications including cranes. Comes in an extensive range of colours in gloss and easy colour matching with Coloryte® Industrial Tint System. At 25ºC, touch dry in 2-3 hours, hard dry in 16 hours, full cure in 7 days and recoating after…

Rhinothane® AC

  • Waterproof/Weather Resistance
  • Hard Wearing & Durable
  • Chemical/Solvent Resistance
2-pack acrylic-modified polyurethane high performance topcoat suitable for truck and bus refinishing and steel fabrications including electrical transformers. Comes in an extensive range of colours in gloss and easy colour matching with Coloryte® Industrial Tint System. At 25ºC, touch dry in 30-45 minutes, hard dry in 12 hours, full cure in 7 days and recoating…

Rhinothane® T

  • Waterproof/Weather Resistance
  • Heat Resistant
  • Hard Wearing & Durable
  • Chemical/Solvent Resistance
2 pack polyurethane high performance topcoat suitable for steel fabrications, truck refinishing and refurbishing fibreglass substrates. Comes in an extensive range of colours in gloss and easy colour matching with Coloryte® Industrial Tint System. At 25ºC, touch dry in 45 minutes, hard dry in 6 hours, full cure in 5 days and recoating within 16…

Thermosil HR

  • Waterproof/Weather Resistance
  • Heat Resistant
  • Hard Wearing & Durable
Modified silicone formula coating with heat resistance to 500°C. Ideal for use on wood heaters, BBQs and engine exhausts. Comes in matt black finish. At 25ºC, touch dry in 5-10 minutes, hard dry in 16 hours and bake for 15-30 minutes at 200ºC. Apply directly to bare metal. Available in 4L and 20L pack sizes.…

Transozinc Silicate 1.52

  • Waterproof/Weather Resistance
  • Heat Resistant
  • Hard Wearing & Durable
  • Chemical/Solvent Resistance
2-pack self-curing ethylsilicate with a high zinc content for an excellent protection of steel structures against corrosion in industrial and marine environments. The product is abrasion resistant and offers good resistance against many solvents and chemicals. Comes in matt grey colour. At 23ºC, touch dry in 30 minutes, hard dry in 4 hours, and recoating…

Transozinc Epoxy Primer 1.55

  • Waterproof/Weather Resistance
  • Hard Wearing & Durable
  • Corrosion Resistance
Fast drying 2-pack polyamide cured epoxy primer pigmented with a high zinc content for the protection of steel structures against corrosion in industrial and marine environments. Comes in matt grey colour. At 23ºC, touch dry in 20 minutes, dry to handle in 4 2-8 hours, full cure in 5 days and recoating after 6 hours.…

Transpoxy ZP Primer 1.61

  • Waterproof/Weather Resistance
  • Hard Wearing & Durable
  • Corrosion Resistance
2-pack polyamide cured epoxy coating pigmented with zinc phosphate and auxiliary anti-corrosive pigments for the protection of steel structures against corrosion. Comes in a range of colours in matt. At 23ºC. touch dry in 2 hours, dry to handle in 10 hours, full cure in 7 days and recoating after 16 hours. Can be used…

Transpoxy MIO Primer 1.64

  • Waterproof/Weather Resistance
  • Hard Wearing & Durable
  • Corrosion Resistance
2-pack polyamide cured epoxy coating pigmented with micaceous iron oxide with good resistance against abrasion and impact. The cured coating provides an excellent barrier against penetration of water and water vapour. Comes in matt silver grey colour. At 23ºC, touch dry in 6 hours, hard dry in 12 hours, full cure in 7 days and…

Transpoxy Uniprimer 1.71

  • Waterproof/Weather Resistance
  • Hard Wearing & Durable
  • Corrosion Resistance
2-pack epoxy primer for excellent protection of steel structures against corrosion in industrial and marine environments. This versatile primer can be used on steel and other metal substrates and is compatible with (ultra) high-pressure hydroblasting as surface preparation. Comes in matt light grey colour. At 23ºC, touch dry in 30 minutes, dry to handle in…

Transozinc HS 1.85

  • Waterproof/Weather Resistance
  • Hard Wearing & Durable
  • Corrosion Resistance
2-pack polyamide cured epoxy primer pigmented with a high zinc content for the protection of steel structures against corrosion in industrial and marine environments. Comes in flat grey colour. At 23ºC, touch dry in 20 minutes, dry to handle in 4 hours, full cure in 5 days and recoating after 6 hours. Complies with the…

Transpoxy Barrier 2.16

  • Waterproof/Weather Resistance
  • Hard Wearing & Durable
  • Corrosion Resistance
Tar free, 2-pack polyamide cured epoxy coating with excellent seawater and corrosion resistance. Offers good leveling and wetting properties which enables tolerance to a lower degree of surface preparation. Comes in off white colour. At 23ºC, touch dry in 6 hours, dry to handle in 16 hours, full cure in 7 days and recoating after…

Transpoxy Barrier 2.18

  • Waterproof/Weather Resistance
  • Hard Wearing & Durable
  • Corrosion Resistance
High solids 2-pack epoxy barrier coating with excellent anticorrosive properties and good impact and abrasion resistance. Good adhesion to St3 prepared steel substrates and compatible with most aged coatings. Comes in semigloss light grey colour. At 23ºC, touch dry in 2 hours, hard dry in 16 hours, full cure in 5 days and recoating after…

Transpoxy Intermediate 2.19

  • Waterproof/Weather Resistance
  • Hard Wearing & Durable
  • Corrosion Resistance
2-pack polyamide cured epoxy coating suitable for atmospheric and immersion conditions. The product is especially suitable as an intermediate coat between organic and inorganic zinc-rich primers and the final topcoat. Comes in matt white and other colours on request. At 23ºC, touch dry in 6 hours, dry to handle in 24 hours, full cure in…

Transolac Finish QD 3.33

  • Waterproof/Weather Resistance
  • Hard Wearing & Durable
Fast drying alkyd finish for rapid refurbishment of containers and maintenance of steel structures in a marine and industrial environment. Comes in a range of AS2700 colours in gloss. At 23ºC, touch dry in 2 hours, hard dry in 16 hours and recoating after 1 hours and before 4 hours to ensure no wrinkling, or…

Transurethane Finish HB 3.44

  • Waterproof/Weather Resistance
  • UV Resistant/Non-Yellowing
  • Hard Wearing & Durable
  • Corrosion Resistance
  • Chemical/Solvent Resistance
2-pack polyurethane topcoat with excellent gloss and colour retention. Good resistance against the spillage of oils and chemicals. Comes in white, jet black and a range of AS 2700 colours in gloss. At 23ºC, touch dry in 1 hour, hard dry in 8 hours, full cure in 7 days and recoating after 1 hours. It…

Transurethane Shield 3.45

  • Waterproof/Weather Resistance
  • UV Resistant/Non-Yellowing
  • Hard Wearing & Durable
  • Corrosion Resistance
  • Chemical/Solvent Resistance
2-pack high solids polyurethane coating for all areas above the waterline with excellent durability and superior gloss and colour retention. Comes in a range of AS 2700 colours in semi-gloss. At 23ºC, touch dry in 2 hours, dry to handle in 6 hours, full cure in 7 days and recoating after 12 hours. Suitable Transocean…

Transocean Niso Finish 3.60

  • Waterproof/Weather Resistance
  • UV Resistant/Non-Yellowing
  • Hard Wearing & Durable
  • Corrosion Resistance
  • Chemical/Solvent Resistance
2-pack acrylic topcoat free from isocyanates with excellent gloss and colour retention with a tough, durable coating suitable for use in marine and industrial environments. Comes in white, jet black and a range of AS 2700 colours in gloss. At 23ºC, touch dry in 1 hour, hard dry in 5 hours, full cure in 2…

Transothane Finish 3.63

  • Waterproof/Weather Resistance
  • UV Resistant/Non-Yellowing
  • Hard Wearing & Durable
  • Corrosion Resistance
  • Chemical/Solvent Resistance
2-pack high gloss polyurethane finish for marine and industrial environments with excellent durability and high gloss and excellent colour retention. Comes in white, jet black and a range of AS 2700 colours in high gloss. At 23ºC, touch dry in 1 hour, dry to handle in 4 hours, full cure in 7 days and recoating…

Transpoxy Glascote 4.40

  • Waterproof/Weather Resistance
  • Hard Wearing & Durable
  • Corrosion Resistance
  • Chemical/Solvent Resistance
2-pack high solids glass-flake epoxy coating with outstanding chemical and abrasion resistance. Especially suitable for areas facing severe corrosive conditions such as in splash zone areas. Comes in semi-gloss black colour. At 23ºC, touch dry in 4 hours, dry to handle in 16 hours, full cure in 3 days and recoating after 12 hours. Complies…

Transpoxy MasterMio 4.46

  • Waterproof/Weather Resistance
  • Hard Wearing & Durable
2-pack high solids epoxy coating pigmented with micaceous iron oxide with excellent resistance against abrasion and impact. Comes in matt mid grey colour. At 23 ºC, touch dry in 2 hours, dry to handle in 8 hours, full cure in 7 days and recoating after 8 hours and before 3 months. Suitable as an intermediate…

Transpoxy Finish 4.60

  • Waterproof/Weather Resistance
  • Hard Wearing & Durable
  • Chemical/Solvent Resistance
2-pack epoxy topcoat for interior and exterior use with good resistance against weathering and the spillage of solvents, lubricants and chemicals. Comes in white, black and grey in gloss. At 23ºC, touch dry in 4 hours, dry to handle in 24 hours, full cure in 5 days and recoating after 16 hours. Cures to a…

Transpoxy TankGuard 4.61

  • Hard Wearing & Durable
  • Chemical/Solvent Resistance
2-pack polyamine cured phenolic epoxy coating with excellent resistance against most acids, alkalis and various solvents. Comes in white and light grey semi-gloss colours. At 23ºC, touch dry in 3 hours, dry to handle in 12 hours, full cure in 5 days and recoating after 12 hours and before 4 days. Has good flow properties…

Transpoxy Guard 4.64

  • Waterproof/Weather Resistance
  • Hard Wearing & Durable
  • Corrosion Resistance
2-pack high build polyamine cured epoxy coating for steel and concrete. Has good resistance against abrasion and excellent resistance against corrosion. Suitable for immersion in seawater, fresh water and potable water. Comes in white gloss colour. At 23ºC, touch dry in 16 hours, dry to handle in 24 hours, full cure in 5 days and…

Transpoxy Masterbond 4.67N

  • Waterproof/Weather Resistance
  • Hard Wearing & Durable
  • Chemical/Solvent Resistance
2-pack high solids epoxy primer/coating formulated with Masterbond binder technology. Has excellent anticorrosive properties and good impact and abrasion resistance. Comes in white, black, golden yellow and a range of AS 2700 colours in semi-gloss. At 23ºC ,touch dry in 3 hours, dry to handle in 20 hours, full cure in 5 days and recoating…

Transozinc Epoxy Primer 91.55

  • Waterproof/Weather Resistance
  • Hard Wearing & Durable
  • Corrosion Resistance
2-pack polyamide cured epoxy primer pigmented with a high zinc content for the protection of steel structures against corrosion in industrial and marine environments. The primer is quick drying and can be used as a holding primer. Comes in matt grey colour. At 23ºC, touch dry in 20 minutes, dry to handle in 4 hours,…

Transpoxy ARC 92.24

  • Waterproof/Weather Resistance
  • Hard Wearing & Durable
  • Corrosion Resistance
2-pack polyamine cured epoxy coating reinforced with a high content of extremely durable pigments. It combines an excellent abrasion resistance with premium anticorrosive properties and is compatible with properly applied cathodic protection. Comes in semigloss mid grey colour. At 23ºC, touch dry in 2 hours, dry handle in 8 hours, full cure in 5 days…

Water Reducible Air Dry Enamel

  • Waterproof/Weather Resistance
  • Hard Wearing & Durable
Fast drying, water-based industrial enamel coating for protection and decoration of metal and timber surfaces including scaffolding, garden implements and handles, and refurbishment of containers. Comes in clear and various colours in gloss. At 25ºC, touch dry in 45-60 minutes, and overnight hard dry. Priming of substrates is generally not needed. Available in 20L and…

Zip Dry Enamel

  • Waterproof/Weather Resistance
  • Hard Wearing & Durable
Fast air-drying industrial enamel coating for protection and decoration of metal surfaces including trailers, machinery, waste bins, radiators and recycled steel drums. Comes in a range of colours in gloss. At 25ºC, touch dry in 10-15 minutes, hard dry in 16 hours and recoating after 10 minutes. Recommended Wagonpaint primers include Zinc Phosphate Primer or…

Scroll To Top