Skip to content

Marine & Protective Coatings

← System Selectors » Marine & Protective Coatings

T6 Methyl Ethyl Ketone (MEK)

    Secondary thinner for reducing specialized coatings to application viscosity. Commercial methyl ethyl ketone. Available in 4L, 20L and 60L pack sizes. Properties Very fast initial flash-off High solvency Typical Applications Refer to Wagon Paints’ Technical department

    Transozinc Silicate 1.52

    • Waterproof/Weather Resistance
    • Heat Resistant
    • Hard Wearing & Durable
    • Chemical/Solvent Resistance
    2-pack self-curing ethylsilicate with a high zinc content for an excellent protection of steel structures against corrosion in industrial and marine environments. The product is abrasion resistant and offers good resistance against many solvents and chemicals. Comes in matt grey colour. At 23ºC, touch dry in 30 minutes, hard dry in 4 hours, and recoating…

    Transozinc Epoxy Primer 1.55

    • Waterproof/Weather Resistance
    • Hard Wearing & Durable
    • Corrosion Resistance
    Fast drying 2-pack polyamide cured epoxy primer pigmented with a high zinc content for the protection of steel structures against corrosion in industrial and marine environments. Comes in matt grey colour. At 23ºC, touch dry in 20 minutes, dry to handle in 4 2-8 hours, full cure in 5 days and recoating after 6 hours.…

    Transpoxy ZP Primer 1.61

    • Waterproof/Weather Resistance
    • Hard Wearing & Durable
    • Corrosion Resistance
    2-pack polyamide cured epoxy coating pigmented with zinc phosphate and auxiliary anti-corrosive pigments for the protection of steel structures against corrosion. Comes in a range of colours in matt. At 23ºC. touch dry in 2 hours, dry to handle in 10 hours, full cure in 7 days and recoating after 16 hours. Can be used…

    Transpoxy MIO Primer 1.64

    • Waterproof/Weather Resistance
    • Hard Wearing & Durable
    • Corrosion Resistance
    2-pack polyamide cured epoxy coating pigmented with micaceous iron oxide with good resistance against abrasion and impact. The cured coating provides an excellent barrier against penetration of water and water vapour. Comes in matt silver grey colour. At 23ºC, touch dry in 6 hours, hard dry in 12 hours, full cure in 7 days and…

    Transpoxy Uniprimer 1.71

    • Waterproof/Weather Resistance
    • Hard Wearing & Durable
    • Corrosion Resistance
    2-pack epoxy primer for excellent protection of steel structures against corrosion in industrial and marine environments. This versatile primer can be used on steel and other metal substrates and is compatible with (ultra) high-pressure hydroblasting as surface preparation. Comes in matt light grey colour. At 23ºC, touch dry in 30 minutes, dry to handle in…

    Transozinc HS 1.85

    • Waterproof/Weather Resistance
    • Hard Wearing & Durable
    • Corrosion Resistance
    2-pack polyamide cured epoxy primer pigmented with a high zinc content for the protection of steel structures against corrosion in industrial and marine environments. Comes in flat grey colour. At 23ºC, touch dry in 20 minutes, dry to handle in 4 hours, full cure in 5 days and recoating after 6 hours. Complies with the…

    Transpoxy Barrier 2.16

    • Waterproof/Weather Resistance
    • Hard Wearing & Durable
    • Corrosion Resistance
    Tar free, 2-pack polyamide cured epoxy coating with excellent seawater and corrosion resistance. Offers good leveling and wetting properties which enables tolerance to a lower degree of surface preparation. Comes in off white colour. At 23ºC, touch dry in 6 hours, dry to handle in 16 hours, full cure in 7 days and recoating after…

    Transpoxy Barrier 2.18

    • Waterproof/Weather Resistance
    • Hard Wearing & Durable
    • Corrosion Resistance
    High solids 2-pack epoxy barrier coating with excellent anticorrosive properties and good impact and abrasion resistance. Good adhesion to St3 prepared steel substrates and compatible with most aged coatings. Comes in semigloss light grey colour. At 23ºC, touch dry in 2 hours, hard dry in 16 hours, full cure in 5 days and recoating after…

    Transpoxy Intermediate 2.19

    • Waterproof/Weather Resistance
    • Hard Wearing & Durable
    • Corrosion Resistance
    2-pack polyamide cured epoxy coating suitable for atmospheric and immersion conditions. The product is especially suitable as an intermediate coat between organic and inorganic zinc-rich primers and the final topcoat. Comes in matt white and other colours on request. At 23ºC, touch dry in 6 hours, dry to handle in 24 hours, full cure in…

    Scroll To Top