[wagon_product_cat_header]
← Products » Thinners & Additives
Enamel Converter
Urethane additive for increasing the drying rate and toughness of Auto Enamel. When added to Auto Enamel reduces touch dry, hard dry and recoating times by 25%. Available in 500ml pack size. Properties Faster surface & through drying Reduced recoat and taping times Improved resistance to assembly & packaging damage Typical Applications For addition to…
Epoxy Accelerator
Amine based accelerator to improve the cure of Epoxy coatings, particularly at low temperatures. Increase the rate of hardening of both amine and polyamide cured epoxy coatings. Available in 500ml pack size. It is NOT recommended for products with good low temperature curing properties and short potlife. Properties Typical Applications
Polyurethane Accelerator
Accelerator to improve the rate of cure in slower drying Polyurethane coatings, particularly at low temperatures. Increases the rate of hardening of isocyanate cure coatings. Available in 1L pack size. Properties Increase the rate of hardening of isocyanate cure coatings Typical Applications To improve the rate of cure of polyurethane coatings – particularly at low…
T1 Polyurethane Spray Thinner
Blended thinner for reducing 2K polyurethanes, Rhinothane® T and Rhinothane® AC, to spray viscosity. Specially formulated blend of hydrocarbon and chemical solvents. Available in 1L, 4L and 20L pack sizes. Properties Typical Applications
T2 Polyurethane Brushing Thinner
Blended thinner for reducing 2K polyurethanes, Rhinothane® T and Rhinothane® AC, to brushing viscosity. Specially formulated blend of hydrocarbon and chemical solvent. Available in 1L, 4L and 20L pack sizes. Properties Controlled initial flash-off for reduced brush drag Flow out properties to enhance gloss Typical Applications Thinning of Rhinothane® T & Rhinothane® AC for brush…
T3 Epoxy Thinner
Blended thinner for reducing 2K epoxy coatings, Rhinamel®, to spray viscosity. Specially formulated blend of hydrocarbon and chemical solvents. Available in 1L, 4L and 20L pack sizes. Properties Typical Applications
T4 Enamel Thinner
Thinner for reducing enamel primers and topcoats to spray viscosity, including Zinc Phosphate, Shoprime and Rhinoprime primers, and Zip Dry, Rapid, Implement Enamels, Purlenamel and Hammerdry. Specially formulated blend of hydrocarbon solvents. Available in 1L, 4L, 20L and 200L pack sizes. Properties Typical Applications
T5 Mineral Turpentine
Thinner for reducing enamel primers and topcoats to brushing, dipping and spray viscosity. Commercial mineral turpentine. Available in 1L, 4L, 20L and 200L. Properties Typical Applications
T6 Methyl Ethyl Ketone (MEK)
Secondary thinner for reducing specialized coatings to application viscosity. Commercial methyl ethyl ketone. Available in 4L and 20L pack sizes. Properties Typical Applications Refer to Wagon Paints’ Technical department
T7 Thinner
Thinner for reducing specific coatings to application viscosity, including Rhinochlor, Chloromarc, Rhicryl and zinc-rich primers. Specially formulated blend of hydrocarbon solvents. Available in 1L, 4L and 20L pack sizes. Properties Typical Applications
T8 Thinner
Thinner for reducing specific coatings to application viscosity, including Colgal and Thermosil HR. Specially formulated blend of hydrocarbon solvents. Available in 1L, 4L and 20L pack sizes. Properties Typical Applications
T9 Universal Thinner
Multi-purpose thinner for reducing various coatings to application viscosity, including NC lacquers, Air-dry Enamels and Baking Enamels. Specially formulated blend of hydrocarbon and chemical solvents. Available in 1L, 4L, 20L and 200L pack sizes. Properties Typical Applications
T10 Lacquer Thinner
Solvent blend formulated for thinning NC lacquers to application viscosity. Specially formulated blend of hydrocarbon and chemical solvents. Available in 4L, 20L and 200L pack sizes. Properties Typical Applications
T12 Gunwash
Solvent for cleaning of spray guns and other application equipment immediately after use. Recycled blend of hydrocarbon and chemical solvents. Available in 4L, 20L and 200L pack sizes. Properties Typical Applications
T13 Methylated Spirits
Alcohol solvent used for cleaning, degreasing and other industrial purposes. Denatured ethanol. Available in 4L and 20L pack sizes. Properties Good solvency for various resins Typical Applications Refer to Wagon Paints’ Technical department
T14 Wax & Grease Remover
Solvent blend for removing wax, grease and other contaminants from bare metal. Specially formulated blend of hydrocarbon solvents. Available in 4L and 20L pack sizes. Properties Typical Applications
T15 Enamel Slow Retarder Thinner
Slow thinner used in conjunction with T9 and T4 for reducing baking enamels to spray viscosity. Specially formulated blend of hydrocarbon solvents. Available in 4L and 20L pack sizes. Properties Typical Applications
T18 Enamel Retarder Thinner
Slow thinner used in conjunction with T9 and T4 for reducing baking enamels to spray viscosity. Specially formulated blend of hydrocarbon solvents. Available in 4L and 20L pack sizes. Properties Slows initial flash off to provide better flow Reduces occurrence of solvent boil Typical Applications Additional thinning of Baking Enamel & Baking Epoxy Enamel when…
T19 Electrostatic No. 2 Thinner
Thinner for adjusting resistivity and spray viscosity of enamel primers and topcoats, including Zinc Phosphate Primer and Rapid Enamel. Specially formulated blend of hydrocarbon and polar chemical solvents. Available in 4L and 20L pack sizes. Properties Adjusts resistivity of coatings for use with electrostatic spray equipment Improves “wrap” on tubular or complex steel fabrications Typical…
T21 White Spirits
Wide boiling range, medium evaporating solvent used in enamel paints. Commercial hydrocarbon solvent. Available in 4L, 20L, and 200L pack sizes. Properties Typical Applications
T24 Acetone
Solvent for clean up of Polyester products and air-dry enamels. Commercial acetone. Available in 1L, 4L, 20L, and 200L pack sizes. Properties Typical Applications
T29 Prepwash
Solvent blend for removing wax, grease and other contaminants from bare metal. Specially formulated blend of solvents. Available in 4L, and 20L pack sizes. Properties Typical Applications
Transocean Special Thinner 6.01
Special thinner for Transocean Acrylic, Antifoulings, Vinyl and Fast Dry lines including Transolac Finish QD 3.33 and other Transocean products where its use is indicated. Properties Typical Applications
Transocean Epoxy Thinner 6.03
Thinner for reducing Transocean Epoxy lines, including Transpoxy Masterbond 4.67N, Transpoxy Finish 4.60, Transozinc Epoxy Primer 1.55 and 91.55, Transpoxy MIO Primer 1.64, Transpoxy Tankguard 4.61 and other Epoxy products from Transocean Coatings. Properties Typical Applications
Transocean PU Thinner 6.04
Special thinner for Transocean Polyurethane lines including Transocean NISO Finish 3.60, Transurethane Finish HB 3.44, Transothane Finish 3.63, Transurethane Shield 3.45, and other products Transocean where its use is indicated. Properties Typical Applications
Transocean Inorganic Zinc Thinner 6.07
Special thinner for Inorganic Silicate Zinc lines including Transozinc Silicate 1.52 and other Transocean products where its use is indicated. Properties Typical Applications