2-pack water-based high performance clear polyurethane topcoat for interior concrete surfaces. Comes in clear gloss, satin and matt. At 25ºC, touch dry in 4-6 hours, hard dry in 24 hours, full cure in 7 days and recoating within 8-24 hours for good intercoat adhesion, or after 24 hours sanding is required. Suitable primers include Rhinamel®, Rhinofloor® SF Premium, Rhinofloor® HS, Rhinofloor® HBE, Rhinaqua® and Transpoxy Masterbond 4.67N. Available in pack kit sizes of 4.95L (Pack A: 4.50L, Pack B: 0.45L) and 9.90L (Pack A: 9.00L, Pack B: 2×0.45L).
Resistance
[get_resistance]
Properties
Environmentally friendly – washes up in water
Low odour (low VOC)
Non-flammable
Superior abrasion resistance
Clear finish (matt, satin & gloss)
Easy to apply
Good chemical resistance
Resists splashes of most common solvents
Typical Applications
High performance topcoat for suitably primed Interior concrete substrates
Can also be applied directly to Interior concrete substrates subject to recommended mechanical surface preparation