Steel Fabrication Coatings

Page: <1234

Transpoxy MasterMio 4.46

view product

2-pack high solids epoxy coating pigmented with micaceous iron oxide with excellent resistance against abrasion and impact. Comes in matt mid grey colour. At 23 ºC, touch dry in 2 hours, dry to handle in 8 hours, full cure in 7 days and recoating after 8 hours and before 3 months. Suitable as an intermediate coat with Transpoxy or Transurethane systems, or can be left uncoated. <br /><br />Complies with bridge coatings specifications of the UK-Highway Agency.

Transpoxy Finish 4.60

view product

2-pack epoxy topcoat for interior and exterior use with good resistance against weathering and the spillage of solvents, lubricants and chemicals. Comes in white, black and grey in gloss. At 23ºC, touch dry in 4 hours, dry to handle in 24 hours, full cure in 5 days and recoating after 16 hours. Cures to a tough and flexible coating and provides excellent adhesion to Transpoxy priming systems.

Transpoxy TankGuard 4.61

view product

2-pack polyamine cured phenolic epoxy coating with excellent resistance against most acids, alkalis and various solvents. Comes in white and light grey semi-gloss colours. At 23ºC, touch dry in 3 hours, dry to handle in 12 hours, full cure in 5 days and recoating after 12 hours and before 4 days. Has good flow properties resulting in a smooth, easy to clean surface, reducing the possibility of cargo adsorption.

Transpoxy Guard 4.64

view product

2-pack high build polyamine cured epoxy coating for steel and concrete. Has good resistance against abrasion and excellent resistance against corrosion. Suitable for immersion in seawater, fresh water and potable water. Comes in white gloss colour. At 23ºC, touch dry in 16 hours, dry to handle in 24 hours, full cure in 5 days and recoating after 24 hours and before 4 days.

Transpoxy Masterbond 4.67N

view product

2-pack high solids epoxy primer/coating formulated with Masterbond binder technology. Has excellent anticorrosive properties and good impact and abrasion resistance. Comes in white, black, golden yellow and a range of AS 2700 colours in semi-gloss. At 23ºC ,touch dry in 3 hours, dry to handle in 20 hours, full cure in 5 days and recoating after 15 hours and before 4 days with 1 pack use. Suitable with most Transocean primers. Good adhesion to St3 prepared steel substrates and compatible with most aged coatings. The coating can be left uncoated or may be recoated with Transpoxy, Transurethane, Transuniprene or Transunilac Finishes. <br /><br />Approved for carriage of Jet Fuels as specified in MIL-PRF-4556F. Qualified by Electrochemical Impedance Spectroscopy (EIS) and ranked as a ‘Heavy Duty coating offering excellent corrosion protection”.

Transozinc Epoxy Primer 91.55

view product

2-pack polyamide cured epoxy primer pigmented with a high zinc content for the protection of steel structures against corrosion in industrial and marine environments. The primer is quick drying and can be used as a holding primer. Comes in matt grey colour. At 23ºC, touch dry in 20 minutes, dry to handle in 4 hours, full cure in 5 days and recoating after 6 hours. Suitable Transocean anti-corrosive topcoats include Transpoxy, Transvinyl and Transoprene products.

Transpoxy ARC 92.24

view product

2-pack polyamine cured epoxy coating reinforced with a high content of extremely durable pigments. It combines an excellent abrasion resistance with premium anticorrosive properties and is compatible with properly applied cathodic protection. Comes in semigloss mid grey colour. At 23ºC, touch dry in 2 hours, dry handle in 8 hours, full cure in 5 days and recoating after 8 hours and before 4 days. Suitable Transocean topcoat with Transocean Antifouling system. Tested and approved according to the requirements of Norsok M-501 standard.

Page: <1234