Steel Fabrication Coatings

Page: <1234>

Transozinc HS 1.85

view product

2-pack polyamide cured epoxy primer pigmented with a high zinc content for the protection of steel structures against corrosion in industrial and marine environments. Comes in flat grey colour. At 23ºC, touch dry in 20 minutes, dry to handle in 4 hours, full cure in 5 days and recoating after 6 hours. Complies with the compositional requirements of SSPC Paint 20 level 2 and ISO 12944.

Transpoxy Barrier 2.16

view product

Tar free, 2-pack polyamide cured epoxy coating with excellent seawater and corrosion resistance. Offers good leveling and wetting properties which enables tolerance to a lower degree of surface preparation. Comes in off white colour. At 23ºC, touch dry in 6 hours, dry to handle in 16 hours, full cure in 7 days and recoating after 12 hours and before 10 days. The product complies with FDA §175.300 for the carriage of dry foodstuffs. The product is high-build and can be applied at 250 micron dry film thickness in a single coat. For faster curing at ambient temperatures, or application at temperatures down to 0°C, a special hardener is available.

Transpoxy Barrier 2.18

view product

High solids 2-pack epoxy barrier coating with excellent anticorrosive properties and good impact and abrasion resistance. Good adhesion to St3 prepared steel substrates and compatible with most aged coatings. Comes in semigloss light grey colour. At 23ºC, touch dry in 2 hours, hard dry in 16 hours, full cure in 5 days and recoating after 16 hours and before 5 days with 1-pack use. Suitable Transocean topcoats include Transpoxy, Transurethane, Transuniprene or Transunilac products, or can be left uncoated.

Transpoxy Intermediate 2.19

view product

2-pack polyamide cured epoxy coating suitable for atmospheric and immersion conditions. The product is especially suitable as an intermediate coat between organic and inorganic zinc-rich primers and the final topcoat. Comes in matt white and other colours on request. At 23ºC, touch dry in 6 hours, dry to handle in 24 hours, full cure in 7 days and recoating after 8 hours and before 3 days. Can be recoated with all Transocean Finishing series. The product complies with FDA §175.300 for the carriage of dry foodstuffs.

Transolac Finish QD 3.33

view product

Fast drying alkyd finish for rapid refurbishment of containers and maintenance of steel structures in a marine and industrial environment. Comes in a range of AS2700 colours in gloss. At 23ºC, touch dry in 2 hours, hard dry in 16 hours and recoating after 1 hours and before 4 hours to ensure no wrinkling, or after 1 day. Recommended Wagonpaint primer with Hi Build Zinc Phosphate Primers.

Transurethane Finish HB 3.44

view product

2-pack polyurethane topcoat with excellent gloss and colour retention. Good resistance against the spillage of oils and chemicals. Comes in white, jet black and a range of AS 2700 colours in gloss. At 23ºC, touch dry in 1 hour, hard dry in 8 hours, full cure in 7 days and recoating after 1 hours. It can be applied at a dry film thickness up to 100 microns in a single coat without affecting gloss properties.

Transurethane Shield 3.45

view product

2-pack high solids polyurethane coating for all areas above the waterline with excellent durability and superior gloss and colour retention. Comes in a range of AS 2700 colours in semi-gloss. At 23ºC, touch dry in 2 hours, dry to handle in 6 hours, full cure in 7 days and recoating after 12 hours. Suitable Transocean primers include Transozinc Silicate 1.52, Transpoxy ZP Primer 1.55, Transpoxy MIO Primer 1.64 and Transpoxy Uniprimer 1.71. <br /><br />Complies to specifications of Norsok M-501 and ISO 20340.

Transocean Niso Finish 3.60

view product

2-pack acrylic topcoat free from isocyanates with excellent gloss and colour retention with a tough, durable coating suitable for use in marine and industrial environments. Comes in white, jet black and a range of AS 2700 colours in gloss. At 23ºC, touch dry in 1 hour, hard dry in 5 hours, full cure in 2 days and recoating after 8 hours. Suitable Transocean primers include Transpoxy ZP Primer 1.55, Transpoxy MIO Primer 1.64 and Transpoxy Uniprimer 1.71.

Transothane Finish 3.63

view product

2-pack high gloss polyurethane finish for marine and industrial environments with excellent durability and high gloss and excellent colour retention. Comes in white, jet black and a range of AS 2700 colours in high gloss. At 23ºC, touch dry in 1 hour, dry to handle in 4 hours, full cure in 7 days and recoating after 12 hours. Can be applied by airless spray as well as by brush and roller. Suitable Transocean primers include Transpoxy ZP Primer 1.55, Transpoxy MIO Primer 1.64 and Transpoxy Uniprimer 1.71.

Transpoxy Glascote 4.40

view product

2-pack high solids glass-flake epoxy coating with outstanding chemical and abrasion resistance. Especially suitable for areas facing severe corrosive conditions such as in splash zone areas. Comes in semi-gloss black colour. At 23ºC, touch dry in 4 hours, dry to handle in 16 hours, full cure in 3 days and recoating after 12 hours. <br /><br />Complies with Norsok M 501, rev.4 requirements and coating specifications for bridges of the UK Highway Agency.

Page: <1234>