Thinners & Additives

Protective Coating Products/Thinners & Additives

Page: 123>

Enamel Converter

Urethane additive for increasing the drying rate and toughness of Auto Enamel. When added to Auto Enamel reduces touch dry, hard dry and recoating times by 25%. Available in 500ml pack size.

Epoxy Accelerator

Amine based accelerator to improve the cure of Epoxy coatings, particularly at low temperatures. Increase the rate of hardening of both amine and polyamide cured epoxy coatings. Available in 500ml pack size.<br /><br />It is NOT recommended for products with good low temperature curing properties and short potlife.

Polyurethane Accelerator

Accelerator to improve the rate of cure in slower drying Polyurethane coatings, particularly at low temperatures. Increases the rate of hardening of isocyanate cure coatings. Available in 1L pack size.

T1 Polyurethane Spray Thinner

Blended thinner for reducing 2K polyurethanes, Rhinothane® T and Rhinothane® AC, to spray viscosity. Specially formulated blend of hydrocarbon and chemical solvents. Available in 1L, 4L, 20L and 60L pack sizes.

T2 Polyurethane Brushing Thinner

Blended thinner for reducing 2K polyurethanes, Rhinothane® T and Rhinothane® AC, to brushing viscosity. Specially formulated blend of hydrocarbon and chemical solvent. Available in 1L, 4L and 20L pack sizes.

T3 Epoxy Thinner

Blended thinner for reducing 2K epoxy coatings, Rhinamel®, to spray viscosity. Specially formulated blend of hydrocarbon and chemical solvents. Available in 1L, 4L and 20L pack sizes.

T4 Enamel Thinner

Thinner for reducing enamel primers and topcoats to spray viscosity, including Zinc Phosphate, Shoprime and Rhinoprime primers, and Zip Dry, Rapid, Implement Enamels, Purlenamel and Hammerdry. Specially formulated blend of hydrocarbon solvents. Available in 1L, 4L, 20L, 60L and 200L pack sizes.

T5 Mineral Turpentine

Thinner for reducing enamel primers and topcoats to brushing, dipping and spray viscosity. Commercial mineral turpentine. Available in 1L, 4L, 20L, 60L and 200L.

T6 Methyl Ethyl Ketone (MEK)

Secondary thinner for reducing specialized coatings to application viscosity. Commercial methyl ethyl ketone. Available in 4L, 20L and 60L pack sizes

T7 Thinner

Thinner for reducing specific coatings to application viscosity, including Rhinochlor, Chloromarc, Rhicryl and zinc-rich primers. Specially formulated blend of hydrocarbon solvents. Available in 1L, 4L, 20L and 60L pack sizes.

Page: 123>