Transocean Epoxy Coatings

Protective Coating Products/Transocean Epoxy Coatings

Transpoxy Finish 4.60

2-pack epoxy topcoat for interior and exterior use with good resistance against weathering and the spillage of solvents, lubricants and chemicals. Comes in white, black and grey in gloss. At 23ºC, touch dry in 4 hours, dry to handle in 24 hours, full cure in 5 days and recoating after 16 hours. Cures to a tough and flexible coating and provides excellent adhesion to Transpoxy priming systems.

Transpoxy Glascote 4.40

2-pack high solids glass-flake epoxy coating with outstanding chemical and abrasion resistance. Especially suitable for areas facing severe corrosive conditions such as in splash zone areas. Comes in semi-gloss black colour. At 23ºC, touch dry in 4 hours, dry to handle in 16 hours, full cure in 3 days and recoating after 12 hours. <br /><br />Complies with Norsok M 501, rev.4 requirements and coating specifications for bridges of the UK Highway Agency.

Transpoxy MasterMio 4.46

2-pack high solids epoxy coating pigmented with micaceous iron oxide with excellent resistance against abrasion and impact. Comes in matt mid grey colour. At 23 ºC, touch dry in 2 hours, dry to handle in 8 hours, full cure in 7 days and recoating after 8 hours and before 3 months. Suitable as an intermediate coat with Transpoxy or Transurethane systems, or can be left uncoated. <br /><br />Complies with bridge coatings specifications of the UK-Highway Agency.

Transpoxy Guard 4.64

2-pack high build polyamine cured epoxy coating for steel and concrete. Has good resistance against abrasion and excellent resistance against corrosion. Suitable for immersion in seawater, fresh water and potable water. Comes in white gloss colour. At 23ºC, touch dry in 16 hours, dry to handle in 24 hours, full cure in 5 days and recoating after 24 hours and before 4 days.

Transpoxy Masterbond 4.67N

2-pack high solids epoxy primer/coating formulated with Masterbond binder technology. Has excellent anticorrosive properties and good impact and abrasion resistance. Comes in white, black, golden yellow and a range of AS 2700 colours in semi-gloss. At 23ºC ,touch dry in 3 hours, dry to handle in 20 hours, full cure in 5 days and recoating after 15 hours and before 4 days with 1 pack use. Suitable with most Transocean primers. Good adhesion to St3 prepared steel substrates and compatible with most aged coatings. The coating can be left uncoated or may be recoated with Transpoxy, Transurethane, Transuniprene or Transunilac Finishes. <br /><br />Approved for carriage of Jet Fuels as specified in MIL-PRF-4556F. Qualified by Electrochemical Impedance Spectroscopy (EIS) and ranked as a ‘Heavy Duty coating offering excellent corrosion protection”.

Transpoxy TankGuard 4.61

2-pack polyamine cured phenolic epoxy coating with excellent resistance against most acids, alkalis and various solvents. Comes in white and light grey semi-gloss colours. At 23ºC, touch dry in 3 hours, dry to handle in 12 hours, full cure in 5 days and recoating after 12 hours and before 4 days. Has good flow properties resulting in a smooth, easy to clean surface, reducing the possibility of cargo adsorption.