Skip to content

Rhinofloor

← Products » Rhinofloor

Rhinofloor Anti-Slip

  • Waterproof/Weather Resistance
  • Chemical/Solvent Resistance
  • Abrasion Resistant
2-pack solvent-free epoxy floor coating for “Antislip” applications Resistance Properties Typical Applications

Epoxy Accelerator

    Amine based accelerator to improve the cure of Epoxy coatings, particularly at low temperatures. Increase the rate of hardening of both amine and polyamide cured epoxy coatings. Available in 500ml pack size. It is NOT recommended for products with good low temperature curing properties and short potlife. Properties Typical Applications

    Poly Linemarking

    • Waterproof/Weather Resistance
    • Hard Wearing & Durable
    • Chemical/Solvent Resistance
    2-pack polyurethane high durability linemarking coating suitable for use in commercial carparks, factory and warehouse floors and retail complex floors. Comes in a range of colours in satin (subject to minimum order requirement). At 25ºC, touch dry in 30 minutes, hard dry in 16 hours, full cure in 7 days and recoating within 6-18 hours…

    Polyurethane Accelerator

      Accelerator to improve the rate of cure in slower drying Polyurethane coatings, particularly at low temperatures. Increases the rate of hardening of isocyanate cure coatings. Available in 1L pack size. Properties Increase the rate of hardening of isocyanate cure coatings Typical Applications To improve the rate of cure of polyurethane coatings – particularly at low…

      Rhicryl® Clear

      • Waterproof/Weather Resistance
      • UV Resistant/Non-Yellowing
      • Hard Wearing & Durable
      • Chemical/Solvent Resistance
      Solvent-based acrylic copolymer clear sealer for use in sealing concrete floors and driveways and concrete roof tiles; and a temporary sealer for carparks, storerooms and warehouses. At 25ºC, touch dry in 30 minutes, hard dry in 4-6 hours and recoating after 4-6 hours. Pedestrian traffic possible after 4-6 hours and vehicular traffic in 5-7 days.…

      Rhicryl® Colour

      • Waterproof/Weather Resistance
      • UV Resistant/Non-Yellowing
      • Hard Wearing & Durable
      • Chemical/Solvent Resistance
      Solvent-based acrylic copolymer colour topcoat finish for use in sealing concrete floors and driveways and concrete roof tiles; and a coating for concrete, bricks and manonry. At 25ºC, touch dry in 30 minutes, hard dry in 4-6 hours and recoating after 4-6 hours. Pedestrian traffic possible after 4-6 hours and vehicular traffic in 5-7 days.…

      Rhicryl® Non-Slip

      • Waterproof/Weather Resistance
      • UV Resistant/Non-Yellowing
      • Hard Wearing & Durable
      • Chemical/Solvent Resistance
      • Slip Resistant
      Solvent-based acrylic topcoat, with anti-slip properties for FOOT TRAFFIC only. Suitable for finishing concrete floors, bricks and masonry. Comes in a range of colours in low to full gloss (subject to minimum order requirement) At 25ºC, touch dry in 30 minutes, hard dry in 4-6 hours and recoating after 4-6 hours. Pedestrian traffic possible after…

      Rhinamel®

      • Waterproof/Weather Resistance
      • Hard Wearing & Durable
      • Corrosion Resistance
      • Chemical/Solvent Resistance
      2-pack industrial epoxy / polyamide finish coat suitable for concrete floors and steel fabrications including machinery and tanks. Comes in a range of stock colours, plus an extensive colour library in gloss. At 25ºC, touch dry in 4-6 hours, hard dry in 16 hours, full cure in 7 days and recoating within 24 hours to…

      Rhinamel® Clear Sealer

      • Waterproof/Weather Resistance
      • Hard Wearing & Durable
      • Corrosion Resistance
      • Chemical/Solvent Resistance
      2-pack industrial epoxy / polyamide sealer and finish coat suitable for concrete floors. At 25ºC, touch dry in 4-6 hours, hard dry in 24 hours, full cure in 7 days and overcoating within 12-36 hours to ensure good intercoat adhesion. Recommended Wagonpaint topcoats include Rhinamel®, and Rhinamel® No. 6. Pack A available in 750ml, 3L…

      Rhinamel® SR

      • Waterproof/Weather Resistance
      • Hard Wearing & Durable
      • Corrosion Resistance
      • Chemical/Solvent Resistance
      • Slip Resistant
      2-pack epoxy / polyamide finish coat with texture profile for slip resistance suitable for use on factory floors, amenities blocks, stairs, walkways and truck trays. Comes in a range of colours in matt. At 25ºC, touch dry in 4-6 hours, hard dry in 16 hours and recoating within 24 hours to ensure good intercoat adhesion.…

      Rhinamel® Supergrip

      • Waterproof/Weather Resistance
      • Hard Wearing & Durable
      • Corrosion Resistance
      • Chemical/Solvent Resistance
      • Slip Resistant
      2-pack epoxy / polyamide finish coat with texture profile for added grip suitable for use on factory floors, amenities blocks, stairs and walkways. Comes in a range of colours in matt. At 25ºC, touch dry in 2-3 hours, hard dry in 16 hours, full cure in 7 days and recoating within 24 hours to ensure…

      Rhinaqua Clear

      • Waterproof/Weather Resistance
      • Hard Wearing & Durable
      • Corrosion Resistance
      • Chemical/Solvent Resistance
      2-pack epoxy / polyamide finish coat with texture profile for added grip suitable for use on factory floors, amenities blocks, stairs and walkways. Comes in a range of colours in matt. At 25ºC, touch dry in 2-3 hours, hard dry in 16 hours, full cure in 7 days and recoating within 24 hours to ensure…

      Rhinaqua® HB – Colour

      • Waterproof/Weather Resistance
      • Hard Wearing & Durable
      • Corrosion Resistance
      • Chemical/Solvent Resistance
      2-pack water based high-build self- priming coloured epoxy floor coating suitable for use on workshop and warehouse floors, food preparation and storage areas and commercial carparks. Comes in an extensive range of AS2700 colours. At 25ºC, touch dry in 1-2 hours, hard dry in 5-6 hours, full cure in 7 days and recoating after 5-6…

      Rhinochlor Clear

      • Waterproof/Weather Resistance
      • Heat Resistant
      • Chemical/Solvent Resistance
      Chlorinated rubber clear sealer for concrete floors. At 25ºC, touch dry in 2 hours, full cure in 2 days and recoating after 6 hours. Available in 20L and 200L pack sizes. Resistance Properties Typical Applications

      Rhinochlor Colour

      • Waterproof/Weather Resistance
      • Heat Resistant
      • Hard Wearing & Durable
      • Chemical/Solvent Resistance
      Coloured chlorinated rubber topcoat for the protection of steel structures immersed in fresh and salt water, and for steel and concrete surfaces in chemical, sewerage and water treatment plants. Comes in a range of colours in semi-gloss. At 25ºC touch dry in 2 hours, full cure in 7 days and recoating after 6 hours. Available…

      Rhinofloor AG

      • Waterproof/Weather Resistance
      • UV Resistant/Non-Yellowing
      • Hard Wearing & Durable
      • Chemical/Solvent Resistance
      2-pack UV-stable saturated polyester polyurethane specifically designed as a high performance ‘Chemical-resistant and Anti-Graffiti’ coating system for flooring applications whether for domestic, retail, commercial and industrial floors. Comes in clear full gloss and satin. At 25ºC, touch dry in 3 hours, hard dry in 12 hours, full cure in 7 days and recoating within 16…

      Rhinofloor® CRE

      • Waterproof/Weather Resistance
      • Heat Resistant
      • Hard Wearing & Durable
      • Chemical/Solvent Resistance
      2-pack solvent-free chemical-resistant Epoxy Novalac flooring system for industrial uses including acid plants, oil refineries, food processing plants and steel mills. Can be applied to suitably prepared horizontal & vertical surfaces and used as a non-slip protective coating when used in conjunction with appropriate anti-slip aggregates. Comes in pipeline Grey or dark grey colour. At…

      Rhinofloor® HBE

      • Waterproof/Weather Resistance
      • Hard Wearing & Durable
      • Chemical/Solvent Resistance
      • Abrasion Resistant
      3-pack solvent-free epoxy floor coating available in ‘Texture’ and ‘Flow’ varieties. ‘Texture’ variety provides a slight stipple effect to the aesthetic properties of the coating for industrial floors. ‘Flow’ provides a smoother and glossier effect to the aesthetic properties of the coating for retail, commercial and industrial applications. Comes in a range of colours in…

      Rhinofloor® HBE – SL

      • Waterproof/Weather Resistance
      • Hard Wearing & Durable
      • Chemical/Solvent Resistance
      • Abrasion Resistant
      4-pack self-levelling solvent-free epoxy coating for industrial floors. Comes in a range of colours in gloss (certain colours subject to minimum order requirement). At 25ºC, full cure in 7 days and recoating within 24 hours to ensure good intercoat adhesion, or after 24 hours sanding is required. Light pedestrian traffic possible after 12-24 hours and…

      Rhinofloor® SF Premium

      • Waterproof/Weather Resistance
      • Hard Wearing & Durable
      • Chemical/Solvent Resistance
      2-pack epoxy solvent-free floor coating for industrial floors including commercial carparks, factory and warehouse floors, food processing plants and commercial kitchens. Comes in clear and a range of colours in gloss (subject to minimum order requirement). At 25ºC, full cure in 7 days and recoating within 24 hours to ensure good intercoat adhesion, or after…

      Rhinofloor® SF Premium (Rapid)

      • Waterproof/Weather Resistance
      • Hard Wearing & Durable
      • Chemical/Solvent Resistance
      Fast drying 2-pack epoxy solvent-free floor coating for industrial floors including commercial carparks, factory and warehouse floors, food processing plants and commercial kitchens. Comes in clear and a range of colours in gloss (subject to minimum order requirement). At 25ºC, full cure in 7 days and recoating within 24 hours to ensure good intercoat adhesion,…

      Rhinopave

      • Waterproof/Weather Resistance
      • Hard Wearing & Durable
      • Chemical/Solvent Resistance
      Single-pack copolymer paving paint for concrete areas including factory floors, driveways, paths and steps. Comes in a range of colours in 70 % semigloss (colour availability may be subject to minimum order requirement). At 25ºC, touch dry in 2 hours, full cure in 7 days and recoating after 4-6 hours. Trafficable in 24 hours. Available…

      Rhinopol® WB

      • Hard Wearing & Durable
      • Chemical/Solvent Resistance
      2-pack water-based high performance clear polyurethane topcoat for interior concrete surfaces. Comes in clear gloss, satin and matt. At 25ºC, touch dry in 4-6 hours, hard dry in 24 hours, full cure in 7 days and recoating within 8-24 hours for good intercoat adhesion, or after 24 hours sanding is required. Suitable primers include Rhinamel®,…

      Rhinopol® WB (UV)

      • UV Resistant/Non-Yellowing
      • Hard Wearing & Durable
      • Chemical/Solvent Resistance
      3-pack water-based high performance UV-stable clear polyurethane topcoat for interior and exterior concrete surfaces. Comes in clear gloss, satin and matt. At 25ºC, touch dry in 4-6 hours, hard dry in 24 hours, full cure in 7 days and recoating within 8-24 hours for good intercoat adhesion, or after 24 hours sanding is required. Suitable…

      Rhinoscreed

      • Waterproof/Weather Resistance
      • Hard Wearing & Durable
      • Chemical/Solvent Resistance
      2-pack epoxy resin system for mixing with washed aggregate / sand in “Screeding” applications for industrial floors. Comes in clear gloss. At 25ºC, full cure in 7 days and recoating within 24 hours to ensure good intercoat adhesion, or after 24 hours sanding is required. Light pedestrian traffic possible after 12-24 hours and light mechanical…

      Rhinothane® T Rollgrade (Gloss)

      • Waterproof/Weather Resistance
      • UV Resistant/Non-Yellowing
      • Heat Resistant
      • Hard Wearing & Durable
      • Chemical/Solvent Resistance
      2-pack polyurethane high performance UV stable gloss topcoat for suitably primed concrete substrates. Comes in an extensive range of gloss colours including clear and easy colour matching with Coloryte® Industrial Tint System. Touch dry in 45 minutes, hard dry in 6 hours, full cure in 5 days and recoating within 16-24 hours for good intercoat…

      Rhinothane® T Rollgrade (Satin)

      • Waterproof/Weather Resistance
      • UV Resistant/Non-Yellowing
      • Hard Wearing & Durable
      • Chemical/Solvent Resistance
      2-pack polyurethane high performance UV stable satin effect topcoat for suitably primed concrete substrates. Comes in an extensive range of satin colours including clear and easy colour matching with Coloryte® Industrial Tint System. At 25ºC, touch dry in 45 minutes, hard dry in 6 hours, full cure in 5 days and recoating within 16-24 hours…

      Transurethane Finish HB 3.44 (Flooring Grade)

      • Waterproof/Weather Resistance
      • UV Resistant/Non-Yellowing
      • Hard Wearing & Durable
      • Chemical/Solvent Resistance
      2-pack high solids polyurethane floor coating providing excellent gloss and colour retention characteristics, along with superior mechanical and abrasion resistance properties. Recommended to be used as a U.V. stable protective topcoat, applied over the Transpoxy Masterbond 4.67N (Flooring Grade) epoxy floor coating system. Comes in a range of AS 2700 colours in gloss. At 23ºC,…

      Transothane Finish 3.63 (Flooring Grade)

      • Waterproof/Weather Resistance
      • UV Resistant/Non-Yellowing
      • Hard Wearing & Durable
      • Chemical/Solvent Resistance
      2-pack polyurethane floor coating providing excellent gloss and colour retention characteristics, along with superior mechanical and abrasion resistance properties. Recommended to be used as a UV stable protective topcoat, applied over the Transpoxy Masterbond 4.67N (Flooring Grade) epoxy floor coating system. Comes in a range of AS 2700 colours in gloss. At 23ºC, touch dry…

      Scroll To Top