A modified, high build chlorinated rubber primer pigmented with non-toxic pigments for use on areas below the waterline. Transoprene Primer can also be specified as a sealer on old, aged Antifoulings. The primer is compatible with all Transocean antifouling systems and complies with the IMO Antifouling system convention (AFS/CONF/26) as a sealer coat. Resistance Properties…
2-pack self-curing ethylsilicate with a high zinc content for an excellent protection of steel structures against corrosion in industrial and marine environments. The product is abrasion resistant and offers good resistance against many solvents and chemicals. Comes in matt grey colour. At 23ºC, touch dry in 30 minutes, hard dry in 4 hours, and recoating…
Fast drying 2-pack polyamide cured epoxy primer pigmented with a high zinc content for the protection of steel structures against corrosion in industrial and marine environments. Comes in matt grey colour. At 23ºC, touch dry in 20 minutes, dry to handle in 4 2-8 hours, full cure in 5 days and recoating after 6 hours.…
2-pack polyamide cured epoxy coating pigmented with zinc phosphate and auxiliary anti-corrosive pigments for the protection of steel structures against corrosion. Comes in a range of colours in matt. At 23ºC. touch dry in 2 hours, dry to handle in 10 hours, full cure in 7 days and recoating after 16 hours. Can be used…
2-pack polyamide cured epoxy coating pigmented with micaceous iron oxide with good resistance against abrasion and impact. The cured coating provides an excellent barrier against penetration of water and water vapour. Comes in matt silver grey colour. At 23ºC, touch dry in 6 hours, hard dry in 12 hours, full cure in 7 days and…
2-pack epoxy primer for excellent protection of steel structures against corrosion in industrial and marine environments. This versatile primer can be used on steel and other metal substrates and is compatible with (ultra) high-pressure hydroblasting as surface preparation. Comes in matt light grey colour. At 23ºC, touch dry in 30 minutes, dry to handle in…
2-pack polyamide cured epoxy primer pigmented with a high zinc content for the protection of steel structures against corrosion in industrial and marine environments. Comes in flat grey colour. At 23ºC, touch dry in 20 minutes, dry to handle in 4 hours, full cure in 5 days and recoating after 6 hours. Complies with the…
Tar free, 2-pack polyamide cured epoxy coating with excellent seawater and corrosion resistance. Offers good leveling and wetting properties which enables tolerance to a lower degree of surface preparation. Comes in off white colour. At 23ºC, touch dry in 6 hours, dry to handle in 16 hours, full cure in 7 days and recoating after…
High solids 2-pack epoxy barrier coating with excellent anticorrosive properties and good impact and abrasion resistance. Good adhesion to St3 prepared steel substrates and compatible with most aged coatings. Comes in semigloss light grey colour. At 23ºC, touch dry in 2 hours, hard dry in 16 hours, full cure in 5 days and recoating after…
2-pack polyamide cured epoxy coating suitable for atmospheric and immersion conditions. The product is especially suitable as an intermediate coat between organic and inorganic zinc-rich primers and the final topcoat. Comes in matt white and other colours on request. At 23ºC, touch dry in 6 hours, dry to handle in 24 hours, full cure in…
2-pack polyamide cured epoxy primer pigmented with a high zinc content for the protection of steel structures against corrosion in industrial and marine environments. The primer is quick drying and can be used as a holding primer. Comes in matt grey colour. At 23ºC, touch dry in 20 minutes, dry to handle in 4 hours,…
2-pack polyamine cured epoxy coating reinforced with a high content of extremely durable pigments. It combines an excellent abrasion resistance with premium anticorrosive properties and is compatible with properly applied cathodic protection. Comes in semigloss mid grey colour. At 23ºC, touch dry in 2 hours, dry handle in 8 hours, full cure in 5 days…